Typical Physical & Chemical Characteristics

Polymer Matrix Structure

Polystyrene crosslinked with DVB

Functional Group

R-(SO₃)-M⁺

Ionic Form, as shipped

Sodium (Na⁺)

Physical Form And Appearance

Clear Spherical Beads

Sphericity

95% min.

Screen Size Range
--- U.S. Standard Screen

16-50 mesh, wet

Particle Size Range

+1.2 mm < 5%, -0.3 mm < 1%

Uniformity Coefficient

1.60 max.

Water Retention, Na⁺ form

40-46%

Swelling Na⁺ → H⁺

6% max.

Shipping Weight, Na⁺ form

780-880 g/l (51 lbs/cu.ft, approx.)

Total Exchange Capacity, Na⁺ form

2.2 eq/l min.

pH Range

0-14

Suggested Operating Conditions

Maximum Temperature (Na⁺ form)

138ºC (280˚F) max.

Minimum Bed Depth

0.6 m (24 inches)

Backwash Expansion

25-50% Bed Expansion

Regeneration
Hydrogen Cycle
Sodium Cycle
Flow Rate
Contact Time

5-10% HCl or 1-8% H₂SO₄
10-15% NaCl
4 to 12 BV/h (0.50 to 1.50 gpm/cu.ft)
At least 20 Minutes

Displacement Rinse Rate

Same as Regenerant Flow Rate

Displacement Rinse Volume

10-15 gallons/cu.ft

Fast Rinse Rate

1.0-10.0 gpm/cu.ft

Fast Rinse Volume

35-60 gal/ft3

Service Flow Rate

1.0-10.0 gpm/cu.ft

Hydraulic Properties

Pressure Drop: The graph above shows the expected pressure loss per foot of bed depth as a function of flow rate at various temperatures.

Backwash: After each cycle the resin bed should be backwashed at a rate that expands the bed 25 to 50 percent. This will remove any foreign matter and reclassify the bed. The graph above shows the expansion characteristics of PC005 in Na form.